On Fri, Aug 19, 2005 at 02:56:53AM +0200, Martin Dvh wrote: > Hi, > What output voltage level should I expect from the basic tx? > > The docs say it delivers maximum 20 mA into 25 or 50 ohm. > > At 50 ohm this should result in 1.0 V max. > > The most I can get out of it is 50 mV
This is what I get too. > What am I missing here. > Or should I suspect a hardware failure (of both dacs, of the reference > voltage, of the basic-tx board) ? The output signal level on the Basic Tx d'boards is lower than Matt or I expected. We would appreciate any trouble shooting help you can provide. It's possible that the termination isn't correct or has the wrong values, etc on the daughterboard. Please take a look at the schematics and let us know what you think. If you've got any questions, ask away A much larger output signal would be great! Eric _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
