I'm directly connecting the Tx/Rx port to the Rx2 port with some coax, no attenuators.
I looked througth the list, and found some potentially helpful threads, but nothing that answers my question. (As far as I can tell, anyway.) http://lists.gnu.org/archive/html/discuss-gnuradio/2006-04/msg00239.html http://lists.gnu.org/archive/html/discuss-gnuradio/2006-06/msg00252.html Thanks, -Lee ----- Original Message ----- From: Thomas Schmid <[EMAIL PROTECTED]> Date: Friday, June 23, 2006 0:36 am Subject: Re: [Discuss-gnuradio] RFX-2400 Loopback To: Lee Patton <[EMAIL PROTECTED]> Cc: [email protected] > How does your physical setup look like?, i.e., how did you connect the > RX to the TX? There were a couple of messages on this mailing list > about that a couple of days ago... > > Cheers, > > Thomas > > On 6/22/06, Lee Patton <[EMAIL PROTECTED]> wrote: > > I'm trying to do a simple loopback using the RFX-2400. I have > written> custom source and sink blocks, and everything works fine > when I connect > > them directly [e.g, fg.connect ( src, dst)]. However, I get > weird data > > in my output file when I put the USRP between them [e.g., > fg.connect ( > > src, u_snk); fg.connect ( u_src, dst)]. There is obviously > something I > > do not understand about the board I'm using. I've attached my > (short)> script, and would greatly appreciate it if one of you > gurus would take a > > look. Oh, and I'm connecting the Tx/Rx port directly to the Rx > port w/ > > 3ft of coax. > > > > Thanks, > > Lee > > > > > > _______________________________________________ > > Discuss-gnuradio mailing list > > [email protected] > > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > > > > > > > > _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
