On Fri, Jun 30, 2006 at 12:11:38PM -0400, Lee Patton wrote: > On Tue, 2006-06-20 at 22:51 -0700, Eric Blossom wrote: > > > [set_auto_tr()] is independent of the daughterboards. > > The daughterboards that care (right now only the RFX boards), set it > > up to enable or disable part of the Tx and RX RF paths depending on > > whether or not there's data to be transmitted in the FPGA fifo. > > [Certain i/o pins on the RFX boards enable various pieces of h/w on > > the d'boards] > > How does it determine if there's data to be transmitted in the FPGA > fifo? Does it look for all zeros in the fifo, or does it have to do > with the a transmitter block returning -1?
None of the above. The FPGA fifo can tell you how full it is. > I'm trying to transmit from Tx/Rx and receive on Rx2. This is going > okay except the transmit data is being repeated over and over, even > after I return -1 from my transmitter block. Eric _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
