Eric, Thank you for your answer.
For our applicaion 150MHz and 400MHz receivers must synchronize very precisely. I cannot use TV RX for this reason. Is the frequency 150MHz too high for Basic RX board? We may need to add more amplifiers between the antenna and the USRP. Thank you very much for the information of "epydoc". I installed ver 2.1 from yum (Fedore Core 4), and run it. But as other E-mail says, I got many errors. It created some results, but I do not know if they are very useful or not... Should I use Ver 3.0 of the epidoc? Regards, Mamoru Yamamoto >On Thu, Nov 09, 2006 at 03:30:28AM +0900, Mamoru Yamamoto wrote: >> Dear GNUradio experts, >> >> I am very new to GNUradio. I am in Kyoto University, Japan studying >> ionosphere by using radar and other techniques. I am interested >> in developing a 150/400MHz beacon receiver with GNUradio + USRP. >> Now I have a USRP base board + Basic RX + Flex 400 for this purpose. > >OK. > >A TV RX daughterboard might be a better choice for the 150 MHz beacon. > >> I have some questions. > >> --- How I can get information on Python functions? >> Documents generated by "doxygen" explain only >> C++ part of the software. (Am I correct?) >> To know Python functions, do I need to read through >> codes? I would like to know if there is a list >> or man-pages of such Python functions. My application >> may not require any new C++ coding. > >You could run epydoc on the python code in and under gnuradio-core/src/python. >Most of the code has epydoc doc strings. > >> --- I learned GNUradio and USRP from network very much. >> Thank you very much. But informations are very much >> scattered. Don't you have a plan of GNUradio (plus USRP) book? > >We've thought about it. Thanks for the words of encouragement. > >> Thanks for your help. Regards, >> >> Mamoru Yamamoto [EMAIL PROTECTED] > >You're welcome. > >Eric > > ---- Mamoru Yamamoto [EMAIL PROTECTED] _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
