Matt Ettus wrote: > All RFX boards currently shipping are configured for MIMO_B mode, which > requires a Rev 4 or higher USRP (serial number greater than 500). > > If you wish to use it with a USRP with a serial number below 500 you > will need to do the following: > > Remove R115 (zero ohms) and place it at R116 > Remove R36 (zero ohms) and place it at R34 > Put the RFX on a USRP (side A) and run the following: > > usrp/host/apps/burn-db-eeprom -f -A -t rfxYYYY_mimo_a > > where YYYY is the board you have (i.e. 400, 900, 1200, 1800, > or 2400).
Perfect! Two questions: What's the difference between MIMO-B and MIMO-A? I assume burning the eeprom is undo-able (redo-able, I suppose)? Thanks, -Dan _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
