it works now, thank you
But, when I tried to run usrp_spectrum_sense.py I got this
$ python usrp_spectrum_sense.py
Traceback (most recent call last):
File "usrp_spectrum_sense.py", line 9, in ?
from usrpm import usrp_dbid
ImportError: No module named usrpm
what is wrong now please.
Don Ward wrote:
----- Original Message ----- From: "Alaelddin Mohammed"
<[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Wednesday, June 20, 2007 11:17 AM
Subject: Re: [Discuss-gnuradio] Error in my first USRP test
I found that I am using libusb-win32 version 0.1.12.0-1, I change
it to version 0.1.10.1-3. I plugged TX and RX in my USRP device. but
I got this error.
$ python test_counting.py
found 5 busses
found 5 busses
usrp_open_interface:usb_claim_interface: failed interface 2
could not claim interface 2, interface invalid
usrp_basic_rx: can't open rx interface
Traceback (most recent call last):
File "test_counting.py", line 53, in ?
main ()
File "test_counting.py", line 46, in main
fg = build_graph ()
File "test_counting.py", line 36, in build_graph
usrp_rx = usrp.source_s (0, rx_decim, 1, 0x32103210,
usrp.FPGA_MODE_COUNTING)
File "/usr/local/lib/python2.4/site-packages/gnuradio/usrp.py", line
266, in __init__
fpga_filename, firmware_filename)
File "/usr/local/lib/python2.4/site-packages/gnuradio/usrp1.py",
line 1502, in source_s
return _usrp1.source_s(*args)
RuntimeError: can't open usrp1
This is normal for Windows libusb0 0.1.10.1-3 the first time you try
to access the USRP. If you try it again (without removing power to
the USRP) it should work. See
http://www.gnuradio.org/trac/wiki/WindowsTips for more tips on using
GNU Radio with Windows.
-- Don W.
What shall I do now please
--Alaelddin
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
