Philip Balister wrote: > What would be a good GNU Radio test on a 500 MHz PPC board, with a > USRP, but no display?
To just test that GNU Radio itself is sane, you can run the dial tone demo in: gnuradio-examples/python/audio/dial_tone.py This will send a dial tone to the audio output. You can test the USB <--> USRP performance using: gnuradio-examples/python/usrp/benchmark_usb.py If you have a suitable receiver board, you can test the whole system by receiving a broadcast FM signal: gnuradio-examples/python/usrp/usrp_wfm_rcv_nogui.py (You need to set which receive side with -R and frequency with -f) -- Johnathan Corgan Corgan Enterprises LLC http://corganenterprises.com _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
