On Sun, Jan 06, 2008 at 10:18:05AM +0800, Jonas Gacrama wrote: > I have a problem recompiling the howto example on "how to make a signal > processing block" webpage. > This is the website should you be interested: > > http://www.gnu.org/software/gnuradio/doc/howto-write-a-block.html > > I ran aclocal, autoconf, then auotomake. > > However, everytime I run automake the following error messages are > displayed:
1) Did you build and install GNU Radio? Does it pass "make check"? 2) Does your --prefix path contain spaces, or does the path to your build directory contain spaces? If so, change to paths without spaces. Eric > [EMAIL PROTECTED]:~/gr-howto-write-a-block-3.1.1$ sudo make > make all-recursive > make[1]: Entering directory `/home/jpgacrama/gr-howto-write-a-block-3.1.1' > Making all in config > make[2]: Entering directory `/home/jpgacrama/gr-howto-write-a-block-3.1.1 > /config' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/home/jpgacrama/gr-howto-write-a-block-3.1.1 > /config' > Making all in src > make[2]: Entering directory `/home/jpgacrama/gr-howto-write-a-block-3.1.1 > /src' > Making all in lib > make[3]: Entering directory `/home/jpgacrama/gr-howto-write-a-block-3.1.1 > /src/lib' > make[3]: *** No rule to make target `/swig/gnuradio.i', needed by > `howto.cc'. Stop. > make[3]: Leaving directory `/home/jpgacrama/gr-howto-write-a-block-3.1.1 > /src/lib' > make[2]: *** [all-recursive] Error 1 > make[2]: Leaving directory `/home/jpgacrama/gr-howto-write-a-block-3.1.1 > /src' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory `/home/jpgacrama/gr-howto-write-a-block-3.1.1' > make: *** [all] Error 2 > > It keeps on saying that there is "No rule to make target `/swig/gnuradio.i', > needed by `howto.cc'. Stop." > > What's the problem here? I really need a reply ASAP! I really need this for > my thesis. Thanks! _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
