Hi I was wondering if anyone could please help me? I'm doing some measurements on the Microtune Cable modem module. I already modified the .py file to be able to set the 3 gain stages independently. I am trying to see how the gains should be set to get an input signal of 2Vp-p to the ADC to be able to use the dynamic range as efficiently as possible. From what I understand, pins 17 and 18 of the cable modem module are the outputs that go to the ADC. This is a differential signal, right? We don't have a differential probe, so I am measuring pins 17 and 18 on 2 oscilloscope channels and then displaying the difference of the two. This should give me the signal that goes to the ADC, right? I'm inputting a 100MHz sine wave, so this should be a 43.75MHz sine wave? Somewhere I am doing something wrong, as this is not what I get. Can anyone who has done something similar please tell me how to do it?
Then I also have a few questions regarding the module itself. From what I understand, the signal gets captured, amplified by the RF amp, mixed down to 43.75MHz, amplified by the IF amp and then sent to the ADC, right? Thank you for your help. Sebastiaan _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
