I am sending a known sequence of samples from one USRP to another using the Basix RX/TX d'boards setting the frequency to 24e6.
When I rx the sequence, the correlation of it keeps flipping, but not in a way that suggests residual carrier. It seems as if I am experiencing an instantaneous flip. My gain on both the RX and TX is set to 500. The signal amplitude I rx is ~1200. When I run the GRC model, the Rx says I have no residual carrier, invert is set to false, the dxc frequency is set to -24e6 and the baseband to zero. On the TX side, I have these same values with the exception of the dxc freq, it is not set to 24e6. Why the flip?? What do all these things mean??? Is 24e6 a bad freq to use with the basic TX/Rx? Thanks in advance! -- View this message in context: http://www.nabble.com/Flipping-problem-tp18614309p18614309.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
