Hi, after you have changed the 'packet_utils.py' in the gnuradio folder, you should
../make and ../make install it again to see the change. Cheers, Hoo Chang. ----- Original Message ---- From: call5_99 <[EMAIL PROTECTED]> To: [email protected] Sent: Wednesday, August 6, 2008 8:07:58 PM Subject: [Discuss-gnuradio] What does access code in benchmark_tx.py do? Hello, I was trying to send and receive packets with the programs benchmark_tx and benchmark_rx. I have two USRP connected to two different computers. My current understanding is, that access code is for synchronization. I changed the default access code completely on the transmitter side from the file, packet_utils.py, whereas I didn't change the default access code on receiver side. However, I am still able to receive the packets sent by the transmitter correctly on the receiving side! So my questions are- 1) Why is nothing affected when the access code is not the same on transmitting and receiving side? 2) Since the synchronization was not affected when I changed the access code, how exactly is synchronization happening in benchmark_tx.py and benchmark_rx.py Thank you. Prasanna. -- View this message in context: http://www.nabble.com/What-does-access-code-in-benchmark_tx.py-do--tp18856636p18856636.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
