> For TDMA schemes, it would be very nice to know the delay of the AD/DA > converters (and filters ...), and easiest would to measure the signal from > the tx port fed back to the same daughterboard via loopback cable to the rx2. > As far as I understand, this is not possible. (All this requires the > timestamps of the inband signaling, of course). > > Would using a second daughterboards rx require a MIMO/modified daughterboard, > or is it ok to use two non-MIMO rfx2400 on the same USRP? In my case, > accuracy of about a few samples would be ok, but there might be other cases > which require higher accuracy.
Stefan, The post really didn't have anything to do with MIMO, it was more about whether the RFX cards were full duplex or not, I see now that Matt sent the reply to me, not to the list, so here is what he said: From: Matt Ettus > >Jason Uher wrote: >> >> Is it possible to simultaneously transmit through 'TX/RX' and receive >> on 'RX2' of a single RFX board? > > > >No. > > >Matt _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
