Are you trying to simultaneously transmit and receive with the
XCVR2450? Because it doesn't do that -- it does not do FDD. The
RFX-series will work in full duplex mode, but you still need to put them
on different frequencies.
If you really need to do this with the XCVR2450, then you will need two
of them.
Matt
Bruhtesfa Ebrahim wrote:
Hey all,
May be my question could be out of topic as it is can be a hardware
problem, so excuses.
The Thing is....I am using USRP with XCVR2450 Tranciever to develop a
doppler radar(in duplex mode).
So, I was checking out my devices.
When I use USRP_fft.py just to see the environment signals without
enabling my USRP_siggen.py, I see a certain signal level.
Then when i start to transmit and recieve in duplex mode
running these two python codes simultaneously in different shell
scripts; the signal(FFT) level
I am recieving decreases too much. Normally, I should get a more
strong recieved signal rather since I am transmitting.
So, does anyone has experience in this stuff ? If so, what do you
think is the problem? could it be a problem with my Trancievers.
Thank you!
Bruhtesfa
------------------------------------------------------------------------
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
