________________________________ From: Brian Padalino <[EMAIL PROTECTED]> To: Bill Stevenson <[EMAIL PROTECTED]> Cc: [email protected] Sent: Wednesday, November 12, 2008 6:49:03 PM Subject: Re: [Discuss-gnuradio] How to bypass the filter on RXF2400 daughterboard On Wed, Nov 12, 2008 at 6:43 PM, Bill Stevenson <[EMAIL PROTECTED]> wrote: > Hi, all!!! > > I have read the manual of the RXF2400 and noticed that there is a filter > restricting the receiving bandwidth to be within ISM bandwidth. But in our > case, we need to work outside 802.11 band to avoid interference from 802.11, > how can we bypass that filter using software? Thanks a lot!!! I believe you must make a hardware modification if you plan on bypassing the filter. Brian Thank you for so quick reply, Brian! Making modification on HW is not what I can do. My case is like this: I am transmitting 1Mbps data with center frequency set to 2483.5MHz. Do you think it is doable without bypassing that filter (still receiving my data without amplitude distorting)? Thank you! Bill
_______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
