On Wed, Nov 12, 2008 at 6:55 PM, Bill Stevenson
<[EMAIL PROTECTED]> wrote:
> Hello, everyone!
>
> I am working on the benchmark_tx.py file, I know the transmit power for
> RXF2400 is 50mW. But is this number corresponding to the option
> -tx-amplitude setting to the default value 12000? If it is, i could
> calculate the real tx power after i changed the tx-amplitude parameter.
Assuming a linear amplifier, the power of your modulated signal is
equal to its magnitude squared.
> Another interesting question is that in receive_path.py file, there is a
> parameter called threshold to control the process of carrier sensing, but
> that parameter is in dB and the default value is set to 30dB! Does it mean
> the real threshold value is set to 1000 Watt? That would be too great! It
> is impossible! If it were not in Watt, is it in mW? I am confused, could
> anyone tell me a little bit about this unit definition in USRP?
It really refers to the dynamic range captured at the ADC.
Please refer to this:
http://www.dsprelated.com/showmessage/36164/1.php
Brian
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
