Hi list,
I finally got my hands on an sd-card reader/writer, and as I have been
trying to get a hold of one for some time I was eager to update my
firmware I jumped straight at the FAQ. Where I was discouraged by the
fact that I have no idea about what device I'm using. Anyway, an answer
is almost always a google away, so I found this link
http://vic.gedris.org/linux-UsbMassStorage/ which tells you to do the
following steps to determine which device you would like to flash.
1. Install sg3-utils package
$sudo apt-get update
$sudo apt-get install sg3-utils
2. List the raw scsi- devices on your system
$sg_scan -i
3. Have a look at the list printed out, and determine which SCSI- device
is most likely your USB- card reader/writer.
4. Run sg_map to see what SCSI- device is associated with the USB sdcard
r/w- device.
$sg_map
Thought this might be something for the wiki- page... Instead of having
just a warning, there could be a warning and a solution =;o]. But since I
Cheers!
Mattias Kjellsson
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
