Hi Gnuradio People, :-) I tried to get the <UDP sink> and <UDP source> to work. But it didn't work as it should. The FFT Plots only shows a white screen. The CPU of my Work PC is under 100% and my Server PC too. Should this be a Problem of <threads> ? I have a network traffic between the connected pc's with about 300Kbyte/s.
Do you have any hints for me? Specification: Work PC: + IP 194.94.26.158 + Firewall with open UDP Port 13130:13133 Server PC: + IP 192.168.111.67 + Firewall with open UDP Port 13130:13133 The Firewall was tested with <nmap -p 13130-13133 -sU IP-ADRESS>. So i created a Flow Graph: ####################################################### ###SERVER PC### [SIN Source]--\ /-->[USRP Sink] +-->+ [COS SOURCE]--/ \-->[UDP Sink 1] SETTINGS for UDP Sink 1: Local IP Address: 192.168.111.67 Port: 13130 Remote IP Address: 194.94.26.158 Port: 13132 [USRP Source]-->[UDP SINK 2] SETTINGS for UDP Sink 1: Local IP Address: 192.168.111.67 Port: 13131 Remote IP Address: 194.94.26.158 Port: 13133 ###WORK PC### [UDP Source1]-->[FFT Plot TX] SETTINGS for UDP Source1: IP Address: 194.94.26.158 Port: 13132 [UDP Source2]-->[FFT Plot RX] SETTINGS for UDP Source2: IP Address: 194.94.26.158 Port: 13133 ####################################################### Regards Markus _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio