Hi, I have one USRP board and 2 Flex900 boards. The Flex900 board has both RX2 and TX/RX. I installed and screwed both Flex900 boards on USRP motherboard and make sure all the holds are matched.
On the B side, I have Flex900 card. What do you think could be the problem? Thanks, Woody On Tue, Feb 17, 2009 at 1:56 AM, Matt Ettus <[email protected]> wrote: > Woody Dickson wrote: >> >> Hello, >> >> Any know what is the cause of the following EEPROM warning? I would >> appreciate any suggestion on how to resolve this problem. >> >> [r...@home usr]# usrp_siggen.py -f1 >> >> Warning: Treating daughterboard with invalid EEPROM contents as if it >> were a "Basic Tx." >> Warning: This is almost certainly wrong... Use appropriate >> burn-*-eeprom utility. >> >> Using TX d'board A: Flex 900 Tx MIMO B >> Failed to set RF frequency >> > > > What do you have on the B side? > > Matt > _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
