Hi, Jason Thank you for your help! Good man! Actually, after running lots of experiments, I found the reason for my problem. One of my USRP is broken and it can only serve as a TX, when playing as RX, that weird thing would happen.
Actually, I am not transmitting one large batch file continuously. I was transmitting 1000 packets 8 times, which means I started the benchmark_rx.py 8 times. E.g., the PDR was 90% 1st time, 80% 2nd time, 60% 3rd time.... Anyway, thank you! I have fixed it now! Bill --- On Fri, 5/8/09, Jason Uher <[email protected]> wrote: From: Jason Uher <[email protected]> Subject: Re: [Discuss-gnuradio] a running problem with the USRP, i am confused! To: "Bill Stevenson" <[email protected]>, [email protected] Date: Friday, May 8, 2009, 4:35 PM > Does it mean USRP could not keep on running for > a long time or the USRP boards we are using have been broken? I do not know > the reason for this problem. Please let me know what's wrong with the USRP. > Thanks a lot! I believe there is an issue with the costas loop implementation in one of the older mpsk_receiver implementations where the phase offset correction gets clipped rather than rolled over (ie, -2pi->2pi). If the offset is small it may take awhile for this error to show up. If you use the verbose costas loop and see the phase correction going up to 2pi or down to -2pi and not rolling over you may have this issue. Jason
_______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
