> usrp_dual_source want antennas which should be used as input parameters, as > follows (I copied this line from a question posted on a thread which was > using LFRX daughter cards) > > self.usrp_dual_source_x_0 = grc_usrp.dual_source_c(which=0, side_a='A', > rx_ant_a='RXA', side_b='A', rx_ant_b='RXB') >
This is correct (assuming you are using GRC) The side A and side B refer to the side of your usrp, not the ports on the RFX board itself. Since you can have two daughter boards, the are side A ad B respectively, you will have to use the rfx antenna select function to choose between TX/RX and RX2. If you are not using grc I have attached a file that I use to capture data from two RFX2400 boards in the same usrp, it will probably require some modifications for your application, but its a start. Jason
multi_rfx_2400.py
Description: Binary data
_______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
