Hi all- Occasionally, while transmitting, my USRP2 will die -- that is, it stops reliably transmitting and then it drops off the network and doesn't come back until restarted. Any ideas? I'm running some vaguely recent firmware, but I've also seen this problem with the version from the factory.
(This is one of the beta units, which is supposed to be identical to the modern version for these purposes.) Here's what triggered it most recently: $ tx_samples -i 20 -r -I /data/cal_signal Failed to enable realtime scheduling usrp2: failed to enable realtime scheduling Daughterboard configuration: baseband_freq=0.000000 duc_freq=0.000000 residual_freq=0.000000 inverted=no ^C $ tx_samples -i 20 -r -I /data/cal_signal Failed to enable realtime scheduling terminate called after throwing an instance of 'std::runtime_error' what(): No USRPs found on interface eth0 Aborted $ tx_samples -i 20 -r -I /data/cal_signal Failed to enable realtime scheduling terminate called after throwing an instance of 'std::runtime_error' what(): No USRPs found on interface eth0 Aborted Thanks, Andy _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio