Hello, I am new to the GNU Radio. I have been following the steps outlined in http://gnuradio.org/trac/wiki/UbuntuInstall, and I am at the point where I am testing. The command: ls -lR /dev/bus/usb | grep usrp shows a single USRP, which is correct.
usrp_benchmark_usb.py Passes everything but the 32 Mb/s test. But when I try to run: test_usrp_standard_tx I receive this output: which: 0 interp: 16 rf_freq: -1 amp: 10000.000000 nsamples: 3.2e+07 Subdevice name is XCVR2450 Tx Subdevice freq range: (2.4e+09, 6e+09) mux: 0x000089 baseband rate: 8e+06 Fail 4200000000.000000 terminate called after throwing an instance of 'std::runtime_error' what(): Could not set frequency. Aborted This is on a USRP, with two XCVR2450 daughterboards. I looked through the wiki, mailinglist, and the web, but I did not find anyone who had this problem. Thank you for your help, Brian Proulx _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
