Following the advice at http://gnuradio.org/trac/wiki/UbuntuInstall, I installed the Jaunty version of the Ubuntu distro. on my PC and the , hoping for a clean installation of the gnuradio code in a Linux environment (gnuradio version 3.2.2-1, according to the synaptic code manager). I am trying to get some UCLA IEEE 802.15.4 code running (at https://www.cgran.org/browser/projects/ucla_zigbee_phy/trunk). Therefore, I also followed the installation instructions at: https://www.cgran.org/wiki/UCLAZigBee#HowToInstall. However, after installation of all of these, when I try to run the dial tone python example (now located in /usr/local/gnuradio_r10495/gnuradio-examples/python/audio/dial_tone.py or the multi-tone examples, I get the following error:
u...@ubuntu:/usr/local/gnuradio_r10495/gnuradio-examples/python/audio$ python dial_tone.py Exception RuntimeError: 'maximum recursion depth exceeded while calling a Python object' in <type 'exceptions.AttributeError'> ignored If I run the oscilloscope example, I get the same error: u...@ubuntu:/usr/local/gnuradio_r10495/gr-utils/src/python$ ./usrp_oscope.py Exception RuntimeError: 'maximum recursion depth exceeded while calling a Python object' in <type 'exceptions.AttributeError'> ignored I get the same error when trying to run the UCLA code examples: u...@ubuntu:/usr/local/ucla_zigbee_phy/src/examples$ python cc2420_rxtest.py Exception RuntimeError: 'maximum recursion depth exceeded while calling a Python object' in <type 'exceptions.AttributeError'> ignored cordic_freq = 2.475G data_rate = 2M samples_per_symbol = 2 usrp_decim = 16 fs = 4M Using RX d'board A: Flex 2400 Rx MIMO B >>> gr_fir_fff: using SSE 802_15_4_pkt: waiting for packet Interestingly, the gnuradio example programs and the UCLA program all appear to work(!). I hear tones for the gnuradio audio examples, see an oscilloscope with radio activity and I can detect some 802.15.4 beacons using the UCLA example. This error seems to have been observed before and to have been attributed to an incompatibility between the linux kernel version (my version is 2.6.28-11) and the specific version of Python (my version is 2.6). e.g. http://www.ruby-forum.com/topic/176968, http://www.mail-archive.com/[email protected]/msg17030.html. However, after a search of the forums and a google or two, I cannot see any information about resolving the issue. Is this a problem that can be ignored safely? To get rid of the error or work around the problem, it seems to me that my possible options are: . Find a different version of Ubuntu and/or gnuradio that are known to work together properly (building from a tarball maybe???). I also need versions that will also support the UCLA code . change my version of python (I have tried an altinstall of python2.5, but get a different set of errors). This assumes that the Python version *is* in fact the issue. . get (more) help from the authors of the UCLA code about the compatible versions of UCLA and gnuradio software and/or the OS kernel and/or Python software that they are using in their labs . Review installation logs for potential problems that may have occurred during installation (are the logs for any of these installation processes stored somewhere or are they just sent to the standard output... which I didn't save?). These options really require some knowledge of what is supposed to work, which I don't have and haven't found yet. The dial_tone and multi_tone examples are pretty simple gnuradio-only ones, right? These examples shouldn't have a lot of dependencies on stuff made and configured during the UCLA code tree installation process, I'm hoping. Any guidance from anyone about what to try next would be very much appreciated. / David _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
