Oh, There was a typo in my previous description: The sub-carrier freq I
set in SW is 4MHz not 2MHz
(i.e. 4MHz sub-carrier set in SW results in a 50KHz sub-carrier on
FFT.). Please let me know if you have any comments. Thank you.
Milo
Milo Wong wrote:
Hi folks,
I wrote a amplitude modulation block and here's an interesting problem:
It seemed that the Freq showed on the plot of post modulation FFT is
always (1/80) of the freq I set in the SW. For example, If I set the
sub-carrier freq to 2MHz, and use a message signal (constant 1.0)to
modulate that, I can only get a 50KHz sub-carrier showed on FFT plot.
I've attached my plots(both in freq and time domain).
Below are the test results:
freq. in post-mod FFT freq. set in SW
12.5k 1M
25k 2M
50k 4M
Is there anyone who has some ideas or comments? Thank you!
Milo
------------------------------------------------------------------------
------------------------------------------------------------------------
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
