Hi, I requested 2.412GHz. This is within the range.
@ Andrea: I tried it with another board and it worked. But the curious thing is that it worked with this specific board a couple of times before and I didn't change the configuration. Maybe it broke just during my task. Thanks, Christoph > The XCVR has a low band range and a high band range > > #define LB_FREQ_MIN U2_DOUBLE_TO_FXPT_FREQ(2.3e9) > #define LB_FREQ_MAX U2_DOUBLE_TO_FXPT_FREQ(2.6e9) > > #define HB_FREQ_MIN U2_DOUBLE_TO_FXPT_FREQ(4.8e9) > #define HB_FREQ_MAX U2_DOUBLE_TO_FXPT_FREQ(6.1e9) > > may I ask what frequency you requested? > > _josh > > Christoph Thein wrote: > > Hello, > > > > I am using the USRP2 with the XCVR2450 db and experience the error > > message "failed to set rx center frequency" from time to time. Is this a > > known problem and if so, is there a way to solve it? > > > > I tested with the program usrp2_rx_cfile.py and with different boards. > > > > Regards, > > > > Christoph > > > > > > > > > > > > _______________________________________________ > > Discuss-gnuradio mailing list > > [email protected] > > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
