2009/11/26 Martin Braun <[email protected]> > On Thu, Nov 26, 2009 at 01:22:36PM +0100, Hanno Jung wrote: > > Hi > > > > I'm trying to update the firmware on usrp2's sd card but I'can't find the > flash > > tool. > > > > I know there was a posting on this topic few weeks ago, where Eric posted > some > > Code, but I do not really know what to do with this. > > http://www.mail-archive.com/[email protected]/msg20924.html > > Hi Hanno, > > within the source tree (using trunk or 3.2.2): > > [insfl4:gnuradio]% find . -name u2_flash_tool > ./usrp2/firmware/u2_flash_tool > [insfl4:gnuradio]% usrp2/firmware/u2_flash_tool --help > Usage: u2_flash_tool: [options] filename > > Options: > -h, --help show this help message and exit > -w, --write write FILE to TARGET slot > -v, --verify verify FILE against TARGET slot > -r, --read read TARGET slot, write to FILE > -t TARGET, --target=TARGET > select TARGET slot from: fpga, s/w [default=s/w] > --dev=DEV specify flash device file, e.g., /dev/sdb. Be > careful! > > Does this help? > > MB > > -- > Karlsruhe Institute of Technology (KIT) > Communications Engineering Lab (CEL) > > Dipl.-Ing. Martin Braun > Research Associate > > Kaiserstraße 12 > Building 05.01 > 76131 Karlsruhe > > Phone: +49 721 608-3790 > Fax: +49 721 608-6071 > www.cel.kit.edu > > KIT -- University of the State of Baden-Württemberg and > National Laboratory of the Helmholtz Association > > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > Thx Martin but for some reason the tool was really not where it was supposed to be. I solved the whole problem by recompiling and reinstalling gnuradio.
After that updating the firmware worked fine. Thanks
_______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
