George Nychis wrote:
http://cyprus.cmcl.cs.cmu.edu/~gnychis/mfilter/bbn_with_probes.tar.gz
<http://cyprus.cmcl.cs.cmu.edu/%7Egnychis/mfilter/bbn_with_probes.tar.gz>
Sorry, make clean it before building... trying to get this out ASAP
since I will be AFK for the next 6 hours or so.
Just run bbn_80211b_transmit.py ... default parameters should work. I
commented out some code which loops sending the packet several times
to help test.
The decodable packet should look like this:
http://cyprus.cmcl.cs.cmu.edu/~gnychis/mfilter/probe_response.pcap
<http://cyprus.cmcl.cs.cmu.edu/%7Egnychis/mfilter/probe_response.pcap>
- George
Interesting - I'm able to capture this with my airpcap (just a 30dB
attenuator and some coax in-between my USRP2 and the airpcap). Lots of
errors (either due to a screwy scrambler function, or something causing
a high bit-error rate. For this one test, everything after the Source
Address (i.e. starting with the BSSID) is wrong.
Doug
--
Douglas Geiger
Code 5545
U.S. Naval Research Laboratory
Washington, DC 20375
(202) 767-9048
[email protected]
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
