Hi List, I have a USRP1 with a WBX in the B side and a DBSRX in the A side. I have just done a fresh install of the stable tarball (3.2.2) and I ran the usrper load_standard_bits. The USRP1 serial number is in the 3700-3800 range so I believe it is compatible with the WBX.
When I run usrp_benchmark I get the following error:- Testing 32MB/sec... Warning: Treating daughterboard with invalid EEPROM contents as if it were a "Basic Tx." Warning: This is almost certainly wrong... Use appropriate burn-*-eeprom utility. Warning: Treating daughterboard with invalid EEPROM contents as if it were a "Basic Rx." Warning: This is almost certainly wrong... Use appropriate burn-*-eeprom utility. uUusb_throughput = 32M ntotal = 16000000 nright = 15988058 runlength = 15988058 delta = 11942 OK Max USB/USRP throughput = 32MB/sec Is there something more I need to do to make this work? Cheers, Matt _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
