Great, thanks. Added it to the wiki Dimitrios Symeonidis "If you think you're too small to make a difference, try sleeping with a mosquito!" - Amnesty International
On Sun, Feb 21, 2010 at 21:16, Josh Blum <[email protected]> wrote: > Subdevice0 is the antenna A, Subdevice1 is the antenna B. You can use both > subdevice 0 and 1 at the same time on two different ddc inputs and tune them > separately. These subdevices are used as real inputs, and the Q inputs to > the ddc are set to zero. > > The third possibility is to use subdevice2 which treats the antenna A and B > as a single complex input (I and Q), and connects them to the I and Q inputs > of the DDC input0. When using subdevice2, you cannot use subdevice 0 and 1. > > -Josh > > > On 02/21/2010 08:22 AM, Dimitrios Symeonidis wrote: >> >> Hi Matt, >> >> I was wondering why the BasicRX and LFRX daughterboards seem to have 3 >> instead of 2 subdevices? This seems to be coming from >> usrp/host/lib/db_boards.cc >> >> Thank you >> >> Dimitrios Symeonidis >> "If you think you're too small to make a difference, try sleeping with >> a mosquito!" - Amnesty International >> >> >> _______________________________________________ >> Discuss-gnuradio mailing list >> [email protected] >> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
