Hi All I am developing a board with gnuradio which is like USRP. It is also use FX2LP(CY7C68013a) and AD9862, and I add some surroundings.
I hope that my board can work well with gnuradio, but it seems like it can only support USRP now. So could you please give me some help, if I want to run gnuradio on my board. How should I do with it? Now I do some test with my board. ---------------------------------------------- When I plug the board to host and run command : lsusb the information list as below: Bus 002 Device 003: ID 0b4:8613 Cypress Semiconductor corp. CY7C68013 EZ-USB FX2 USB 2.0 Development Kit When I plug the USRP it shows Bus 002 Device 003: ID 0xfffe:0x0002 My board is recognized by PC, but VID and PID is different from USRP. What's the problem with it? It means the driver(s) is not correct? Or I should change something in the source or head file? PS: I don't configuration EEPROM with CY7C68013a now. Does this cause some issues? Should I leave it blank? If not, what and how should I burn in it? --------------------------------------------------------------------------------- When I run benchmark_rx.py, it shows "Fail to automatically setup a usrp device". I think it make sense, because the PC doesn't find USRP anyway. Thank you guys all!! Best Regard Sindy
_______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
