Well, the modification is for changing the code in such a way that it works on USRP2 since the original version is written for USRP. The rest is the same. Also it does't seem this is a programming bug since, it works for some time and then it crashes.
Rahman On Fri, Apr 30, 2010 at 8:06 PM, Marcus D. Leech <[email protected]> wrote: > On 04/30/2010 08:02 PM, Rahman Doost wrote: > > hello everyone, > > I 'm trying to collect some samples from my spectrum sensing code running > on USRP2, which is a slightly revised version of 'usrp_spectrum_sense.py'. > My problem is that after some time during the scan of some band, this > message appears: "Failed to set frequency to ...". For instance I let the > board to sweep my band 1000 times but after 100 or more scans (it's really > variable) it stops its normal operation and can't lock on a frequency > anymore. > I tested this with both WBX and XCVR front-ends in 400M and 2.4G. But the > problem persists. Since I need to let the USRP2 work and collect samples for > quite a long period, I really need to come up with a solution. I was > wondering if someone has already encountered this problem and has solved it. > > Rahman > > > _______________________________________________ > Discuss-gnuradio mailing > [email protected]http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > Does the non-slightly-revised version do the same thing? > > > > -- > Marcus Leech > Principal Investigator > Shirleys Bay Radio Astronomy Consortiumhttp://www.sbrac.org > > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > >
_______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
