Hi all, I just purchased 52MHz external clock from Kestral signal processing, after successful follow up of installation guide ( http://gnuradio.org/redmine/wiki/1/OpenBTSClockModifications), I tested usrp I got this message:
z...@zero-laptop:~/gnuradio/gnuradio-examples/python/usrp$ sudo ./usrp_benchmark_usb.py Testing 2MB/sec... and no any further lines, please let me know what I made wrong your reply is appreciated On Wed, May 12, 2010 at 9:36 PM, David Barton <[email protected]>wrote: > Hi, > > > > I have set up the following simple digital data transmitter: > > > > > > File source -à throttle -à packet encoder --- > DBPSK modulator - > à USRP2 > > File size sample rate samples/sym - 2 samples/sym > – 2 Inter rate 32 > > -variable 3.125M bits/sym - 1 excess > BW – 0.35 Freq 400M > > access code – n/a > grey code - yes Gain 0 > > pad for USRP – yes > > payload len – 0 > > > > > > What is the transmit (over the air) data rate of this line up ? > > > > Please explain how the rate is derived. > > > > Thanks, > > Dave > > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > -- Thanks.....
_______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
