Did you manage to have an IP/TCP section working? I tried changing both the carrier threshold and interpolation, decimation values but every time I tried pinging the other USRP, I got the message 'Destination Host Unreachable'.
I tried benchmark_tx/rx and always had packet drops; benchmark_ofdm_tx/rx always had TIMEOUT. The only thing that worked for me was transmitting a sine wave using usrp_siggen and plot it using usrp_scope. I'm so confused. I've been trying to identify the problem for almost 2 weeks now but no avail. If it helps, I'm running Ubuntu 10.04, GNU Radio 3.2.2 tarball. Hardware: USRP, RFX2400 daughterboards and WA5VJB antennas (the antennas are not from Ettus Research, but should work fine) Tuan On Tue, Jul 6, 2010 at 11:32 PM, Juan Quiroz <[email protected]> wrote: > I did the same question a few weeks ago! You should change carrier > threshold to a higher value, default is 30 db, I changed to 50 db to get a > clear connection, I'm working with openSUSE 11.1 and I'm root user > transmitting in first wifi channel, so I write in console: > user# python tunnel.py -f 2412e6 -c 50 > > Good Luck > > Juan Quiroz > > > > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio >
_______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
