I burned DBSRX usrp2 firmware image (burn_dbsrx_eeprom.bin) as suggested, but then only F LED turned on and find_usrps command says: No USRP2 found which was not the case initially.
Then I burned UHD firmware and UHD fpga image from ( http://code.ettus.com/redmine/ettus/projects/public/wiki/U2binaries#Firmware-Images). Now, LEDs D and F turns up but still find_usrps gives No USRP2 found. I also tried burning Raw ethernet FPGA image and Raw ethernet, no WBX or XCVR image on the SD card. LEDs D and F lights up but still find_usrps gives No USRP2 found. (While burning all of those firmware and fpga images using (both usrp2_card_burner_gui.py and dd.exe), I received an error - error 87 the parameter is incorrect) Please advise, Amee
_______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
