Hi all GNUradio users,
I am using Ubuntu 9.04 and using GNUradio 3.2.2 My task here is to activate the local oscillator on the daughterboard itself in order to have the USRP2 perform as a tx standalone device. >From my understanding the local oscillator is activated once I set the frequency of the transmission itself. In order to initialise the local oscillator I need to initialise the RFX2400 daughterboard on the USRP2 using the firmware provided onto the SD Card. I am facing several problems and was wondering if I am approaching in the correct direction. I was checking out db.h under usrp2/firmware/lib and came across the file db_init.c Upon closer examination I discover that the initialisation for the daughterboard is only for the Basic TX daughterboard What I need to do here is to initialise the TX portion of the RFX2400. I have changed the variable &db_basic_tx to &db_rfx_2400_tx inside the function db_init.c Am I missing out anything else that is allowing me to initialise the daughterboard? How do I make sure that the daughterboard is initialised? I have checked out the schematics as well but due to my limited knowledge, I can only deduce that I need to initialise the GPIO and clocks. I will appreciate any comments and help here. I have just 1 week left to finish this project. Thank you! Regards, Theodore
_______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
