> Hello, > > thanks for your quick answer. > > I checked it and I think ists okay. > > inupc33:/home/gnuradio/gnuradio/uhd/host/utils # route -n > Kernel IP Routentabelle > Ziel Router Genmask Flags > Metric Ref Use Iface > 129.69.175.0 0.0.0.0 255.255.255.0 U 0 > 0 0 eth0 > 192.168.10.0 0.0.0.0 255.255.255.0 U 0 > 0 0 eth1 > 169.254.0.0 0.0.0.0 255.255.0.0 U 0 > 0 0 eth0 > 127.0.0.0 0.0.0.0 255.0.0.0 U 0 > 0 0 lo > 0.0.0.0 129.69.175.254 0.0.0.0 UG 0 > 0 0 eth0 > > And in contrast to Luca I used the > ping -I eth1 192.168.10.2 -command to be sure that is use the right network > device. > > Tobias
Luca wrote me that he solved the issue, maybe you have a firmware/FPGA image mismatch, such that the firmware boots and lights the LEDs but cannot receive/reply to ethernet packets properly. Matthias Anfang der weitergeleiteten E-Mail: > Von: Luca Pascale <[email protected]> > Datum: 28. Juli 2010 11:56:41 MESZ > An: Matthias Wilhelm <[email protected]> > Betreff: Re: [Discuss-gnuradio] No UHD Devices Found > > Hi Matthias, > > thanks for your reply. > I have solved loading the UHD last firmware/FPGA image. Now all is ok. > > Next step is to control 2 USRP2 in a fully synchronized(and coherent) way. > Thanks again. > Luca > > > 2010/7/28 Matthias Wilhelm <[email protected]> > Hello, > > "destination host unreachable" indicates that the route is not set correctly. > Try > > # route add -net 192.168.10.0/24 dev eth1 > > or check > > # route -n > > to see if the routing is using the proper network devices. > > Matthias > > > Am 28.07.2010 um 11:10 schrieb Tobias Schmid: > > > Hi, > > > > I've got exactly the same problem. > > In my case the lights D and F are light up. > > > > The usrp2_card_burner_gui.py works correctly. I've checked that by flashing > > the cards with the common firmware. > > And that works fine. > > > > Tobias > > > > Am 15.07.2010 18:32, schrieb Josh Blum: > >> Are the UHD images burned onto the sd card? > >> > >> http://code.ettus.com/redmine/ettus/projects/public/wiki/U2binaries#UHD-Firmware-and-FPGA-Images > >> > >> http://www.ettus.com/uhd_docs/manual/html/usrp2.html#load-the-images-onto-the-sd-card > >> > >> Are lights E and F light up on the front panel once powered up? > >> > >> -Josh > >> > >> On 07/15/2010 09:28 AM, Luca Pascale wrote: > >>> Hi, > >>> I have received two new USRP2 (rev 4) with a BasicRx DB. I connect the > >>> DB, > >>> set the gbit lan so that : > >>> > >>> eth1 Link encap:Ethernet HWaddr 00:15:17:e6:86:56 > >>> inet addr:192.168.10.1 Bcast:192.168.10.255 Mask:255.255.255.0 > >>> inet6 addr: fe80::215:17ff:fee6:8656/64 Scope:Link > >>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > >>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > >>> TX packets:190 errors:0 dropped:0 overruns:0 carrier:0 > >>> collisions:0 txqueuelen:1000 > >>> RX bytes:0 (0.0 B) TX bytes:27244 (27.2 KB) > >>> Memory:f3000000-f3020000 > >>> > >>> I connect the USRP2 to the GBIT lan port and try: > >>> ping 192.168.10.2 > >>> > >>> PING 192.168.10.2 (192.168.10.2) 56(84) bytes of data. > >>> From 192.168.10.1 icmp_seq=2 Destination Host Unreachable > >>> From 192.168.10.1 icmp_seq=3 Destination Host Unreachable > >>> From 192.168.10.1 icmp_seq=4 Destination Host Unreachable > >>> > >>> am I missing something ? > >>> > >>> (I have also builded UHD and tried uhd_find_devices...result: No UHD > >>> Devices > >>> Found ) > >>> > >>> Any suggestions ?? (same behaviours on both uspr2) > >>> thanks in advance Luca > >>> > >>> > >>> > >>> > >>> _______________________________________________ > >>> Discuss-gnuradio mailing list > >>> [email protected] > >>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > >> > >> _______________________________________________ > >> Discuss-gnuradio mailing list > >> [email protected] > >> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > >> > > > > > > _______________________________________________ > > Discuss-gnuradio mailing list > > [email protected] > > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > >
_______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
