On 08/05/2010 10:29 AM, Matthias Wilhelm wrote:
Hi,
we received two new XCVR2450 boards today (serial ~1390), and it seems they
refuse to work out of the box. I tested the boards both with UHD and raw
ethernet firmware+FPGA, the board both are unable to tune to different
frequencies, or any frequency for that matter. The usrp2_fft.py script
complains that it failed to set the frequency, an older board works with the
same code (serial ~700).
Due to size issues, the xcvr handling had to be moved into its own image
for the gnuradio usrp2 drivers. Did you use the xcvr-specfic firmware image?
http://ettus-apps.sourcerepo.com/redmine/ettus/projects/public/wiki/U2binaries#Firmware-Images
For UHD, it identifies the boards correctly, but it looks like the attached
picture everywhere, with or without antenna ;-)
usrp2_fft.py will not work when the uhd images on the sd card. But im
not sure what you were running. :-)
-Josh
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
