Thanks again for your replies. But, I did try: $ cp /etc/ld.so.conf /tmp/ld.so.conf $ echo /usr/local/lib >> /tmp/ld.so.conf $ sudo mv /tmp/ld.so.conf /etc/ld.so.conf $ sudo ldconfig
Nothing helps. BTW, I used libboost-all-dev from synaptic package manager rather than boost_1_37_0. Doug, you are right. I find gnuradio under /usr/local/lib/python/dist-packages/. My old Ubuntu version has the path /usr/local/lib/python/site-packages/gnuradio. Other solutions? Thanks, Brook Jeffrey Lambert wrote: > > This might also be because you have not setup the usrp in udev? > > http://k1vzx.com/mediawiki/index.php?title=USRP:_Software_Setup > > ~JeffL > > On 8/25/2010 3:28 PM, Brook Lin wrote: >> >> Hi All, >> >> I followed the instructions on >> http://gnuradio.org/redmine/wiki/gnuradio/UbuntuInstall to install >> gnuradio-3.3.0 onto Ubuntu-10.04 LTS. I used qwt-5.2.1, boost_1_37_0, and >> all other packages from synaptic package manager. After ./configure >> --with-boost=$BOOST_PREFIX, I got: >> >> The following GNU Radio components have been successfully configured: >> >> config >> gruel >> gnuradio-core >> usrp >> usrp2 >> gr-usrp >> gr-usrp2 >> gr-msdd6000 >> gr-audio-alsa >> gr-audio-oss >> gr-atsc >> gr-cvsd-vocoder >> gr-gpio >> gr-gsm-fr-vocoder >> gr-noaa >> gr-pager >> gr-radar-mono >> gr-radio-astronomy >> gr-trellis >> gr-video-sdl >> gr-wxgui >> gr-qtgui >> gr-sounder >> gr-utils >> gnuradio-examples >> grc >> docs >> >> You my now run the make command to build these components. >> >> ********************************************************************* >> The following components were skipped either because you asked not >> to build them or they didn't pass configuration checks: >> >> gcell >> gr-gcell >> gr-audio-jack >> gr-audio-osx >> gr-audio-portaudio >> gr-audio-windows >> gr-comedi >> >> These components will not be built. >> Configured GNU Radio release 3.3.0 for build. >> >> Meanwhile, there is no error during the installation. And the USRP is >> recognized by "ls -lR /dev/bus/usb | grep usrp", I got "crw-rw---- 1 root >> usrp 189, 129 2010-08-25 13:12 002". >> >> However, when I tried to run "./usrp_benchmark_usb.py", I got the error >> that >> "ImportError: cannot import name usrp". I also found that there is >> nothing >> under directory /usr/local/lib/python2.6/site-packages. How should I fix >> this problem? Can anyone give me some advice? >> >> Thanks in advance, >> Brook >> > > > -- > ~Jeffrey Lambert, K1VZX > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > -- View this message in context: http://old.nabble.com/Gnuradio-3.3.0-on-Ubuntu-10.04-tp29535765p29536641.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
