On 08/31/2010 07:50 AM, William Cox wrote:
I'm trying to add a DC offset to the output of my LFTX driven from a USRP 1. Is this possible progromatically? I edited my GRC block diagram to include adding a constant value to my complex stream, before inputting into the USRP sink block. I have a scope output at the same point, which shows adding a constant value to the signal, but the output of the USRP doesn't match. What am I missing? I've tried adding both a constant real value, and a complex constant with equal parts I and Q - neither work. Thanks. -William
If you have a non-zero frequency set on the USRP then your DC offset will be mixed to that frequency. If you really want DC offset then you can not use the DUC, or you can use the registers in the AD9862 to add DC offset after the upconversion. The registers will only give you a limited range, however.
Matt _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
