Marcus,
Would you post your flow graph? Also, did you use TUN/TAP?
Andrew
On Mon, Oct 18, 2010 at 08:37:33PM -0400, Marcus D. Leech wrote:
> I've noticed latency issues with one of the applications I'm working on.
> Latencies of up to tens of seconds
> have been observed, which I tried to combat by specifying
> recv_buff_size in the parameter list.
>
> Right now, I'm running with 4096 bytes, which at 400Ksps, gives me a
> roughly 1 second latency between
> input and output (where output is both an audio sink, and a couple of
> different file sinks as well as a
> scopesink2, and an FFT sink). But increasing it beyond 4096 bytes
> causes the latency to go up very
> quickly, and if I drop it to 1024 bytes, I start seeing over-runs. If
> you do the math, however, 4096 bytes is
> nowhere near 1 second worth of buffer. One second is 1.6Mbytes
> (400Ksps x 4bytes per sample).
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
