On 10/20/2010 03:57 PM, Jorge Miguel wrote: > Hello, > > I burned in my SD card the UDP FPGA image and the FIRMWARE of basic tx > and rx for UDP > > http://code.ettus.com/redmine/ettus/attachments/74 > http://ettus.com/u2bin/txrx_udp_20100507.bin > > After powering the USRP2, only the two leds of Image and FPGA and on, > which is fine. > > My feeling was that I can be able to ping the USRP to 192.168.10.2 > being my host computer 192.168.10.1 > I cannot see the USRP. In fact running a sniffer I see nothing from > the USRP. (Neither in Windows nor Ubuntu) > > I made sure that there is no firewall blocking the UDP traffic. > > What can be wrong? > Many thanks, > Jorge. > > The "UDP Beta" firmware does *not* have a complete IP stack, and doesn't reply to ICMP ECHO (ping) traffic.
If you are heading down the UHD road (which you should be), then you'll need the latest UHD Firmware/FPGA images: http://www.ettus.com/downloads/uhd_images/ -- Marcus Leech Principal Investigator Shirleys Bay Radio Astronomy Consortium http://www.sbrac.org _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
