For the gnuradio + usrp2 driver, there is a separate firmware image for
WBX and XCVR2450. Which image did you use?
http://code.ettus.com/redmine/ettus/projects/public/wiki/U2binaries#Firmware-Images
-Josh
On 11/14/2010 12:08 PM, XIAN PAN wrote:
Hi,
I met a problem for receiving signal by the USRP2-XCVR2450.
Already installed GNU Radio 3.3.0 and The latest firmware and Raw Ethernet
FPGA images have been written
onto the SDRAM: u2_rev3-20100603.bin, u2_rev3-20100603.bin.
I used usrp2_fft.py and the centre freq is 2.421G (I typed my bluetooth
keyboard quickly that would send many packets on frequence 2.421G). But the
usrp2_fft.py script shown only noise, none of the useful signal could be
received on my USRP2. Is there a USRP2-XCVR2450 receive problem while using
the latest firmware and raw ethernet FPGA code?
Thanks
Lion
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
