On 11/16/2010 11:57 AM, Gregory, Adam wrote:
Hi all,
I'm trying to get a MIMO setup working using USRP2s with the UHD
drivers. I have a PC with 2 gigabit Ethernet interfaces, and a USRP2
connected to each.
My problem is that I can't change the USRP2 IP address so that the two
devices have different addresses. I can set the IP address in the
motherboard EEPROM using usrp_burn_mb_eeprom, and I can see the
updated IP address reported when I run uhd_usrp_probe, but the IP
address the USRP2 answers to is still 192.168.10.2.
Power-cycling the device has no effect, nor does trying another PC in
case of any address caching. I've tried with UHD firmware & fpga
images built myself from the latest git, and also with the 01/09/2010
release.
I've seen on the mailing list archives that some people have had
success with MIMO and UHD, and I haven't found any reference to IP
address problems. I must be missing something. Could anyone help please?
Thanks in advance,
Adam
--
Send us an "ifconfig" of your two GiGe interfaces
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio