On Sun, 2010-12-26 at 01:02 -0800, Josh Blum wrote:
> > Thanks very much Josh. Yes the device is found :
> >
> > Loading firmware image: /usr/share/uhd/images/usrp1_fw.ihx... done
> > --------------------------------------------------
> > -- UHD Device 0
> > --------------------------------------------------
> > Device Address:
> > type: usrp1
> > name:
> > serial: 4c745353
> >
> > Just to be crystal clear, A UHD implementation of a GNURadio-Companion file
> > is the same as GNURadio i.e. source is USRP not UHD for USRP1?
> >
>
> Use the blocks in the UHD category (not USRP). Also, the floating point
> samples are between -1.0 and 1.0 which is different than the old driver,
> so that could change things depending upon your app. Its best to run it
> and see what happens. :-)
>
> > Also, when I populate with the DBSRX2 in addition to LFRX, can I run both?
> > I saw a post from August saying something about only 1 i/o path at the
> > moment.
> >
>
> Both channels should work. Configure the single usrp block for two
> channels and setup the subdevice specification string (should be docs
> for this in the block properties dialog box).
>
> -josh
>
> _______________________________________________
> Discuss-gnuradio mailing list
> [email protected]
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Thanks very much Josh - now I understand,
Kind Regards,
John
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
