First of all, thank you for your advice. Now i encountered another Problem: At first i updated UHD via git pull, then i did (from the "build" directory) cmake ../ make make test sudo make install
everything works fine (well, not everything, but at least the installation ;-) ). Then i went to my gnuradio directory and did: git checkout next git clean -xf git pull # GNU Radio release is now v3.3.1git-865-gd429522b instead of v3.3.1git-865-gd429522, but this should be newer export LD_LIBRARY_PATH=$BOOST_PREFIX/lib ./bootstrap ./configure --with-boost=$BOOST_PREFIX # ./configure now includes gr-uhd, so this problem is solved. Thanks again! make Then, make fails with: Making install in swig make[5]: Betrete Verzeichnis '/home/fs/gnuradio-git/gnuradio/usrp/host/swig' make install-am make[6]: Betrete Verzeichnis '/home/fs/gnuradio-git/gnuradio/usrp/host/swig' make[6]: *** Keine Regel vorhanden, um das Target »usrp_prims.cc«, benötigt von »_usrp_prims_la-usrp_prims.lo«, zu erstellen. Schluss. make[6]: Verlasse Verzeichnis '/home/fs/gnuradio-git/gnuradio/usrp/host/swig' make[5]: *** [install] Fehler 2 make[5]: Verlasse Verzeichnis '/home/fs/gnuradio-git/gnuradio/usrp/host/swig' make[4]: *** [install-recursive] Fehler 1 make[4]: Verlasse Verzeichnis '/home/fs/gnuradio-git/gnuradio/usrp/host' make[3]: *** [install-recursive] Fehler 1 make[3]: Verlasse Verzeichnis '/home/fs/gnuradio-git/gnuradio/usrp' make[2]: *** [install] Fehler 2 make[2]: Verlasse Verzeichnis '/home/fs/gnuradio-git/gnuradio/usrp' make[1]: *** [install-recursive] Fehler 1 make[1]: Verlasse Verzeichnis '/home/fs/gnuradio-git/gnuradio' make: *** [install] Fehler 2 Sorry, that it's in german, heres the translation: Betrete Verzeichnis = Entering directory Verlasse Verzeichnis = Leaving directory Fehler = Error And the (probably) critical part causing the error: make[6]: *** Keine Regel vorhanden, um das Target »usrp_prims.cc«, benötigt von »_usrp_prims_la-usrp_prims.lo«, zu erstellen. Schluss. make[6]: *** No Rule given, for making Target »usrp_prims.cc«, needed by »_usrp_prims_la-usrp_prims.lo«. Ending. If you (or anyone else) got another hint on how to solve this i would be really glad. Thanks again and in advance Fabian On Thu, Jan 20, 2011 at 3:11 PM, Alexandru Csete <oz9...@gmail.com> wrote: > On Thu, Jan 20, 2011 at 2:51 PM, Fabian Klaes <fabian.kl...@gmail.com> > wrote: > > Dear list, > > > > i somehow can't get the UHD working with GRC. Detecting an USRP2 with > > uhd_find_devices works just fine. > > I am building from git (master) (what should include the UHD since today. > > I'm also seeing the gr-uhd directory.) > > The merging of next -> master was announced for UHD, not for GNU > Radio. You need: > UHD master branch > GNU Radio next branch > see http://ettus-apps.sourcerepo.com/redmine/ettus/projects/uhd/wiki > > > > I think that the issue is with ./configure, because there i can't find > > gr-uhd when ./configure is finished. It prints: > > > > ********************************************************************* > > The following components were skipped either because you asked not > > to build them or they didn't pass configuration checks: > > > > usrp2-firmware > > > > These components will not be built. > > > > > > ********************************************************************* > > The following GNU Radio components have been successfully configured: > > > > config > > gruel > > gnuradio-core > > usrp > > usrp2 > > gr-usrp > > gr-usrp2 > > gr-msdd6000 > > gr-audio-alsa > > gr-audio-oss > > gr-atsc > > gr-cvsd-vocoder > > gr-gpio > > gr-gsm-fr-vocoder > > gr-noaa > > gr-pager > > gr-radar-mono > > gr-radio-astronomy > > gr-trellis > > gr-video-sdl > > gr-wxgui > > gr-qtgui > > gr-sounder > > gr-utils > > gnuradio-examples > > grc > > docs > > > > You my now run the make command to build these components. > > > > ********************************************************************* > > The following components were skipped either because you asked not > > to build them or they didn't pass configuration checks: > > > > gcell > > gr-gcell > > gr-audio-jack > > gr-audio-osx > > gr-audio-portaudio > > gr-audio-windows > > gr-comedi > > > > These components will not be built. > > > > Configured GNU Radio release v3.3.1git-144-gf294603d for build. > > This number is for the master branch. The correct revision id for the > next branch is (was earlier today) v3.3.1git-865-gd429522 > > > > But gr-uhd is neither in the components that will be build, nor in those, > > that won't be build. > > > > I also tried ./configure --enable-gr-uhd but that didn't change a thing > :-( > > > > > > If you got any ideas on how to proceed, please let me know. > > > > Aside from using the correct GNU Radio branch (next) you also need to > install UHD first, otherwise the GNU Radio configure script will not > detect it and will skip it. > > Alex >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio