Just to expand on Matt's answer a little. ISE 12.2 and ISE 12.3 are also known to work to build the USRP2 UHD FPGA image. I haven't tried ISE12.4 yet. -Ian
> > > Message: 4 > Date: Sat, 12 Feb 2011 12:20:13 -0800 > From: Matt Ettus <[email protected]> > Subject: Re: [Discuss-gnuradio] Requirements for building USRP2 FPGA > firmware on Ubuntu 10.04 > To: Elvis Dowson <[email protected]> > Cc: GNU Radio Discussion Group <[email protected]> > Message-ID: <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1 > > On 02/12/2011 12:03 PM, Elvis Dowson wrote: >> Hi, I know its been discussed many times, it's a bit confusing as to >> the exact versions of the tools that are required for building USRP2 >> FPGA firmware, for use with the UHD driver on Ubuntu 10.04. The >> README file in the uhd git repo for the fpga folder doesn't list this >> information. > > I think there is a terminology issue here. The FPGA image is built by > ISE. The firmware is built by gcc. I assume you mean the FPGA image. > >> Question 01: Which version of ISE is know to work with the UHD driver >> and GNU Radio 3.3.1 master branch? > > This is where you are going wrong. UHD is not a part of GNU Radio 3.3.1. > > If you want to use UHD, you need the GNU Radio next branch. In that > case you must use ISE 12.1. > >> >> Question 02: What is the build command and what options should I use >> to build the USRP2 UHD FPGA firmware image? > > Go into the u2_rev3 directory and type "make bin" > > Matt > > > > _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
