On Thu, 17 Feb 2011, Josh Blum wrote:
Warning:
WBX: No tunable bandwidth, fixed filtered to 40MHz
You probably have something in the bandwidth parameter. Use zero to not set.
Change to zero.
UHD source block got error code 0x1
gr_block_executor: source <gr_block uhd single_usrp source (8)> produced
no output. We're marking it DONE.
So there was an issue with some macos not working with the udp/asio
implementation. You should be able to demonstrate this pretty easily
with the examples/rx_timed_samples that comes w/ uhd.
If you saw my entire message, I copied the output of rx_timed_samples; it
appeared to be working just fine.
I fixed it here fa35192bcb89c6f026d76d7f5190e22341840a47 by disabling
the implementation, and the next branch has the implementation
completely re-worked.
Make sure that you have the most recent master or next branch built and
installed.
I did this 30 minutes ago, as you suggested, and I'm still getting the
same error.
-J
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
