On 08/04/2011 10:30 AM, Thomas H Kim wrote:
Hi all,
I'm transmitting a packet to 2.4G band using RFX2400 on USRP1 and
observed this problem:
Once in a while, the transmission stops in the middle of the packet
being transmitted.
Does anyone know if 1) there is any TX amp control line which is
controlled by the FPGA and in what condition it toggles,
Any transmit power control will be under control of the software--the
FPGA doesn't make spontaneous decisions about that.
2) if it can happen when USRP underrun (uU) occurs
When the host-side underruns the transmitter, it must necessarily
transmit 0s, which effectively turns off the transmitter for the
duration of the underrun.
3) if there is a schematic for RFX2400 and usrp1 available?
Schematics available here:
http://code.ettus.com/redmine/ettus/projects/public/documents
I'm using gnuradio 3.2.2.
Thanks,
Thomas
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
