Hello Guys, I am experiencing some problems in transmitting/receiving at frequencies around 900MHz for WBX board. While, I am able to do so cleanly at 900MHz, other center frequencies are not.
The signal bandwidth : 50 KHz The sampling frequency: 200 KHz I have tried 901MHz , 900.1MHz, 910MHz and many others but the received signal appears to be wider than it should be. The signal level is higher than -40dbm over the total 200 KHz range when these frequencies are used. The only frequencies I was able to use with no problems are 900MHz, 1.8 GHz , 890MHz, 880MHz. What could be the problem? I have tried to use "tune_request_t" in the target frequency paramter but it gave similar bad results . Any pointers? Kind regards, Yahia Tachwali ________________________ _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
