On 04/12/2011 10:45 PM, ton ph wrote: > ---------- Forwarded message ---------- > From: ton ph <[email protected]> > Date: Wed, Apr 13, 2011 at 11:14 AM > Subject: Re: [Discuss-gnuradio] Guide : what is the value of the IF > converted before feeding the ADC in usrp/gnuradio > To: "Marcus D. Leech" <[email protected]> > > > Thanks Marcus for your immediate reply. Now i have a DBSRX and WBX > daughterboard , how can i know in what IF it is converted before the ADC, is > there any other means to check the IF intake of the ADC ? ... > > One more thing i would like to know is that , does the IF converted is the > same for all the frequencies and bands ? >
For most daughterboards, the IF is usually the tuning error between the user's requested center frequency and the actual frequency as supported by the hardware. So the IF is usually close to 0. The user may override this (in many cases to move the LO out of the spectrum of interest). See http://www.ettus.com/uhd_docs/doxygen/html/structuhd_1_1tune__request__t.html#af9d2c5fb89c10024b1acae43e88ebe7f -Josh _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
